my canon mp210 printer keeps saying low ink warning

Pixma “MP” Printer Series: Universal Ink Counter Reset Category 3 (Procedure #3.d.)Ĭanon MP140 thru MP830 Printer Models Only Push the 'Stop/Reset' button four times in a row.Pixma “MP/MX/MG” Printer Series: Ink Counter Reset Category 3(Procedure #3.c.) Wait a few minutes for the printer to recognize the cartridges before trying to print.Place the ink cartridges back inside once you see a message that says 'Replace Cartridges.'.Plug the power cable back in and hit the 'On/Off' button.Lift out both ink cartridges and close the cover.Lift up the Canon MP 470 printer cover and wait for the cartridges to move to the left.Hit the 'Stop/Reset' button when you see a message that says 'Without Cleaning.' This tells the Canon printer to print out a test page.Hit the right arrow button until you see 'Shipping Mode 3' on the LCD display.Hit the 'Stop/Reset' button two times while holding down the 'On/Off' button, then let go of the 'On/Off' button.Press the 'On/Off' button while you plug the cable back in.Turn off the Canon MP printer and unplug it from the outlet.Pixma “MP” Printer Series: Ink Counter Reset Category 3 (Procedure #3.b.)

Close the cartridge door and release the power button.

Reconnect the power cables while still holding down the power button.

Open the cartridge door and hold down the power button.

Unplug the power and the USB cables from the printer.

Turn off the printer by pushing the power button one more time.

Push the 'Stop/Reset' button four (4) times in a row.

Wait approximately 20 to 30 seconds until the LED shows 0.

While still holding down the power button, release the 'Stop/Reset' button and then push it twice in a row.

Hold the 'Stop/Reset' button while pushing the power button.

Press the power button to turn off the printer.

Pixma MP/MX/MG Series: General Printer & Ink Counter Reset Category 3 (Procedure #3.a) The blinking ink level/power light should go steady after a few

Press and Hold the Power Button hold both buttons for 5 seconds.

Pixma iP Ink Counter Reset Category 2 (Procedure #2)

Printing will continue under the ‘ink out’ condition.

Or, select ‘Stop’/’Reset’, ‘OK’ or the ‘Resume’ button on your printer for 5 seconds.

At computer screen message, select ‘Stop’/’Reset’, ‘OK’, or ‘Resume’,.

Pixma iP/MP/MX/MG Ink Counter Reset Cateogory 1 (UNIVERSAL RESET Procedure #1) CANON PIXMA iP1600, iP1800, iP2600, iP2700, iP2702 Category 3:Ĭanon PIXMA printer models with LCD/display screen. Printers which do not have an LCD display, i.e. You may need to try more than one method to make it work. Your printer may fall into more than one category. Follow the instruction below to refill your original cartridge, and use the resetter to reset the chip. Use a chip resetter (e.g., search Canon + model number + resetter on eBay).These refillable cartridges have an auto-reset chip (non OEM) and will reset automatically. Purchase a “refillable cartridge” from BCH (or other sellers.If you just refill the ink, the printer will still reads the cartridge as empty. NOTE: for multi-cartridge installation, the procedure(s) may need to be repeated twice.įor PGI-5, PGI-9PBK, CLI-8, PGI-220 CLI-221 PGI-225 CLI-226 PGI-250 CLI-251 Cartridges: These are new Canon cartridges which have an embedded chip on each cartridge. Ink waste container reset procedures are also provided below. In most cases, the error/alert will need to be cleared to enable printing.

The following procedures may be used to reset the Canon printer ink level monitoring following the installation of a refilled Canon 30, 31, 40, 41, 50, 51, 210, 211, 240, or 241 integrated ink cartridges.

My canon mp210 printer keeps saying low ink warning